Hydrologic Losses

Learning Objectives

  • Identify major components of hydrologic losses including initial abstractions.
  • Understand the principles and estimation methods of evaporation and evapotranspiration.
  • Analyze infiltration processes and soil moisture characteristics.
  • Apply infiltration models such as Horton's, Green-Ampt, and Philip's equations.

Understanding the processes that reduce the volume of water available for runoff, including Evaporation, Transpiration, and Infiltration.

Introduction

Not all precipitation that falls becomes runoff. A significant portion is lost to Hydrologic Losses (or abstractions). These processes reduce the volume of water available for streamflow and groundwater recharge.

Major Components of Hydrologic Losses

Hydrologic losses include Interception (rain caught by vegetation), Depression Storage (water trapped in small puddles), Evaporation (water vaporizing from surfaces), Transpiration (water released by plants), and Infiltration (water entering the soil).

Initial Abstractions

Interception

Precipitation that is caught by the vegetative canopy and never reaches the ground. It eventually evaporates back into the atmosphere. The volume depends on storm size, vegetation species, and season (e.g., leaf-on vs. leaf-off).

Interception Capacity

Interception initially occurs rapidly at the beginning of a storm until the vegetative surfaces are saturated (the interception capacity). After this, interception loss occurs only at the rate of evaporation from the wet leaves during the storm.

Depression Storage

Water trapped in small puddles, depressions, and uneven surfaces on the ground. Once filled, water spills over to become overland flow. It is eventually lost to evaporation and infiltration after the rain stops.

Reduction of Evaporation

In arid regions, significant volumes of water are lost from reservoirs due to evaporation. Measures are often taken to reduce this loss.

Methods of Reducing Evaporation

Methods include reducing the exposed surface area (deep reservoirs instead of shallow ones), mechanical covers (floating spheres or roofs), and Chemical Films. Chemical films are thin, monomolecular layers of organic compounds spread on the water surface. The most common chemicals are Cetyl Alcohol (Hexadecanol) and Stearyl Alcohol. They are non-toxic, effectively form a barrier to water molecules, and are cheap, though they can be disrupted by wind and wave action.

Evaporation

Evaporation

The process by which water changes from liquid to vapor state, occurring from free water surfaces (lakes, oceans), soil moisture, and vegetation surfaces.

Factors Affecting Evaporation

Solar Radiation

The primary energy source providing latent heat of vaporization.

Temperature

Higher air and water temperatures increase the saturation vapor pressure, accelerating evaporation.

Wind

Removes the saturated air layer directly above the water surface, maintaining a vapor pressure gradient.

Humidity

High relative humidity reduces the vapor pressure deficit (es−ea)(e_s - e_a), slowing evaporation.

Estimation Methods

  1. Pan Evaporation Method

Uses a standard US Weather Bureau Class A Pan (diameter 1.21m, depth 25.5cm).

Lake Evaporation

Estimates lake evaporation from pan evaporation data.

Elake=Cp⋅EpanE_{lake} = C_p \cdot E_{pan}

Variables

SymbolDescriptionUnit
ElakeE_{lake}Lake evaporationmm/day
EpanE_{pan}Pan evaporationmm/day
CpC_pPan coefficient (typically 0.7 for Class A Pan)

  1. Meyer's Formula (Empirical)

Meyer's Formula

Empirical equation for estimating evaporation from a water surface.

E=C(es−ea)(1+0.1w)E = C (e_s - e_a) (1 + 0.1 w)

Variables

SymbolDescriptionUnit
EEEvaporation rate
ese_sSaturation vapor pressuremm Hg
eae_aActual vapor pressuremm Hg
wwWind speedmph
CCCoefficient (0.36 for deep, 0.50 for shallow waters)

Interactive Simulation

Use the simulation below to explore the concept dynamically.

Evaporation Rate Simulator

Adjust the environmental variables to see how they impact the daily evaporation rate.

Loading chart...

  1. Penman Equation

A more theoretically sound, combination method that calculates potential evaporation based on both the energy balance (net radiation) and aerodynamic (wind and humidity) principles.

Penman Method Principles

The Penman equation estimates the rate of evaporation from an open water surface or transpiration from vegetation (evapotranspiration) using weather data. It combines the mass transfer method (aerodynamic factors) and the energy budget method (solar radiation) to provide a robust estimation.

The most widely accepted and accurate method for estimating reference evapotranspiration (ET0ET_0) is the FAO Penman-Monteith equation. It physically combines the energy balance (radiation driving vaporization) with the aerodynamic transport (wind and humidity removing vapor).

FAO Penman-Monteith Equation

Standard method for computing reference crop evapotranspiration.

ET0=Δ(Rn−G)+ρacp(es−ea)raλ(Δ+γ(1+rsra))ET_0 = \frac{\Delta (R_n - G) + \rho_a c_p \frac{(e_s - e_a)}{r_a}}{\lambda (\Delta + \gamma (1 + \frac{r_s}{r_a}))}

Variables

SymbolDescriptionUnit
ET0ET_0Reference evapotranspiration rate
RnR_nNet radiation at the surface
GGSoil heat flux density
es−eae_s - e_aVapor pressure deficit
ra,rsr_a, r_sAerodynamic and surface resistances
Δ,γ,λ\Delta, \gamma, \lambdaThermodynamic constants and psychrometric parameters

Interactive Simulation

Change daily weather inputs to compare the radiation and aerodynamic terms of FAO-56 reference evapotranspiration.

FAO-56 Reference Evapotranspiration

Concept and model scope

Compare the radiation and aerodynamic contributions to daily reference evapotranspiration.

The FAO-56 daily Penman–Monteith equation models a reference grass surface. Daily soil heat flux is set to zero. Minimum and maximum temperatures are equally spaced around the selected daily mean, and actual vapor pressure is estimated from mean relative humidity.

Controls

20 °C

Daily mean temperature at 2 m. It controls the slope of the saturation vapor pressure curve.

10 °C

Difference between daily maximum and minimum air temperature. Their saturation pressures are averaged.

2.0 m/s

Mean daily wind speed at 2 m. It affects aerodynamic transport and the denominator.

60 %

Used to estimate actual vapor pressure. At 100 percent the vapor pressure deficit and aerodynamic contribution vanish.

15.0 MJ/m²/day

Net energy reaching the reference surface over the day.

0 m

Elevation above sea level used to estimate station pressure and the psychrometric constant.

Daily reference evapotranspiration
4.998 mm/day
Vapor pressure deficit
0.975 kPa
Station pressure 101.3 kPa
Radiation contribution
3.435 mm/day
Aerodynamic contribution
1.564 mm/day

Contribution bar · Radiation in amber, aerodynamic transport in blue.

Evapotranspiration (ET)

The combined process of evaporation from soil and plant surfaces, and transpiration from plant leaves. It is often the largest component of water loss from a catchment.

Potential Evapotranspiration (PET)

The maximum possible rate of evapotranspiration from a surface, assuming an unlimited, adequate supply of water is always available. It depends solely on meteorological factors.

Actual Evapotranspiration (AET)

The real rate of evapotranspiration occurring under existing field conditions. It is limited by the actual soil moisture available.

Note

When soil is at field capacity (plenty of water), AET=PET\text{AET} = \text{PET}. As soil dries out and approaches the permanent wilting point, AET drops significantly below PET.

Measurement using Lysimeters

Lysimeter Types

A Lysimeter is a tank filled with soil and vegetation, buried flush with the surrounding field.

  • Weighing Lysimeter: The most accurate type. It continuously measures the weight of the entire tank. The loss in mass directly corresponds to the water lost via ET.
  • Drainage Lysimeter: Operates on a water balance principle (ET=Input−DrainageET = \text{Input} - \text{Drainage}). It requires saturating the soil and measuring the water that drains out the bottom.

Infiltration and Soil Moisture

Infiltration is deeply linked to the state of moisture already in the soil profile.

Soil Moisture Characteristic Curve

This curve, also known as the Water Retention Curve, relates the soil water content (θ\theta) to the soil water potential (suction or tension, ψ\psi). It shows how strongly water is held in the soil pores.

  • Field Capacity: The amount of water remaining in soil after downward gravity drainage has ceased.
  • Permanent Wilting Point: The moisture content at which plants can no longer extract water against the soil's capillary suction, causing them to wilt and die.

Infiltration

Infiltration

The passage of water through the soil surface into the soil profile. It replenishes soil moisture and groundwater aquifers.

Infiltration Capacity (fpf_p) is the maximum rate at which a given soil can absorb water. It is high at the beginning of a storm and decays exponentially to a constant rate (fcf_c) as the soil pores fill with water and clay particles swell.

Measurement of Infiltration (Infiltrometers)

Infiltration rates are typically measured in the field using infiltrometers.

Types of Infiltrometers

1. Single Ring Infiltrometer: A metal ring driven into the soil. Water is added, and the rate it drops is measured. Drawback: Lateral flow beneath the ring overestimates the true vertical infiltration rate. 2. Double Ring Infiltrometer: Uses two concentric rings. Both are filled, but measurements are only taken from the inner ring. The outer ring provides a buffer zone that prevents lateral flow from the inner ring, ensuring accurate vertical infiltration measurements.

Horton's Equation

Robert Horton (1933) modeled this decay process:

Horton's Infiltration Equation

Empirical model describing the exponential decay of infiltration capacity over time.

fp(t)=fc+(f0−fc)e−ktf_p(t) = f_c + (f_0 - f_c) e^{-kt}

Variables

SymbolDescriptionUnit
fp(t)f_p(t)Infiltration capacity at time tmm/hr
f0f_0Initial infiltration capacitymm/hr
fcf_cUltimate (constant) infiltration capacitymm/hr
kkDecay constanthr−1hr^{-1}

Interactive Simulation

Change the storm intensity and duration to see when rainfall exceeds the Horton infiltration capacity. Compare cumulative infiltration with rainfall excess.

Horton Infiltration and Rainfall Excess

Concept and model scope

Compare rainfall supply with declining infiltration capacity and see when rainfall excess starts.

This event-scale teaching model decays Horton capacity with elapsed time during a continuous storm. Actual infiltration is the smaller of rainfall rate and capacity. It integrates those rates through the crossing point. Recovery, depression storage, and routing are outside this event model.

Controls

100 mm/h

Potential infiltration rate when the storm starts. It must be at least the final capacity.

15 mm/h

Asymptote of the Horton capacity curve during the event.

0.5 h⁻¹

Speed of decay toward the final capacity. Zero holds capacity at the initial value.

40 mm/h

Rainfall supply. Rainfall above the instantaneous capacity becomes excess in this model.

4.0 h

Length of the continuous constant-intensity storm.

Rate (mm/h) versus elapsed timeRate (mm/h)100001234Elapsed time (h)
Infiltration capacityActual infiltrationRainfall
Actual infiltration depth
148.18 mm
Rainfall excess depth
11.82 mm
Total rainfall 160.00 mm

Rainfall excess begins at 2.45 h.

Green-Ampt and Philip's Models

While Horton's equation is strictly empirical, other more physically-based models exist based on Darcy's Law and capillary principles.

Green-Ampt Method

An analytical solution based on Darcy's Law. It assumes a sharp wetting front separating the saturated soil above from the dry soil below. It requires specific soil parameters like hydraulic conductivity (KK), capillary suction head (ψ\psi), and change in moisture content (Δθ\Delta \theta).

Philip's Two-Term Model

An analytical approximation to Richards' equation governing unsaturated flow. It models cumulative infiltration (FF) using two terms: Sorptivity (SS), dominating early stages due to capillary forces, and Transmissivity/Conductivity (AA), dominating later stages due to gravity.

Philip's Equation

Two-term approximation modeling cumulative infiltration considering sorptivity and gravity.

F(t)=St1/2+AtF(t) = S t^{1/2} + A t

Variables

SymbolDescriptionUnit
F(t)F(t)Cumulative infiltration
SSSorptivity parameter (capillary forces)
AATransmissivity/Conductivity parameter (gravity)
ttTime

Infiltration Indices

Used to estimate average infiltration over a storm duration, simplifying the varying rate.

1. Φ\Phi - Index (Phi Index)

The average rainfall intensity above which the rainfall volume equals the runoff volume. It assumes a constant loss rate throughout the storm.

Phi Index Condition

Calculates total runoff volume by assuming a constant average infiltration loss rate.

Total Runoff Volume=∑(I−Φ)⋅Δt\text{Total Runoff Volume} = \sum (I - \Phi) \cdot \Delta t

Variables

SymbolDescriptionUnit
IIRainfall intensity
Φ\PhiPhi Index (average infiltration rate)
Δt\Delta tTime interval

Phi Index Summation

Only sum for time intervals where the rainfall intensity II is greater than the Φ\Phi-Index.

Interactive Simulation

Use the unequal-duration rainfall bars to compare storm loss and excess depth. Switch to fitting mode to find the constant loss rate that reproduces a selected direct runoff depth.

Phi-Index Loss and Runoff

Concept and model scope

The constant phi-index is an event-average abstraction rate. The model caps losses at the rainfall rate in each interval and multiplies the remaining intensity by that interval’s duration. The observation used for fitting is direct runoff depth with baseflow already excluded.

Split each rainfall interval into loss and excess, or fit the constant loss rate to an observed runoff depth.

Controls
Specified phi-index

Maximum effective loss intensity in each interval.

15 mm/h
Rain intensity (mm/h)4001234567Elapsed time (h)
Gray: effective loss · Blue: excess rain · Dashed: phi-index
Storm rainfall depth
102.50 mm
Effective loss depth
70.00 mm
Computed direct runoff depth
32.50 mm
Phi-index
15.00 mm/h

2. W - Index

The average infiltration rate over the storm duration.

W Index Formula

Calculates the average infiltration rate over the storm duration excluding initial abstractions.

W=P−R−StrW = \frac{P - R - S}{t_r}

Variables

SymbolDescriptionUnit
WWW Index (average infiltration rate)
PPTotal precipitation/rain
RRTotal runoff
SSDepression storage and interception
trt_rDuration of rainfall

Green-Ampt Infiltration Model

The Green-Ampt model is a physically-based equation derived from Darcy's Law that describes the infiltration of water into the soil as a sharp wetting front.

Green-Ampt Equation

It assumes a sharp boundary (wetting front) dividing soil with initial moisture content from fully saturated soil. As infiltration progresses, the wetting front moves deeper, and the infiltration rate decreases asymptotically to the saturated hydraulic conductivity.

Green-Ampt Infiltration Rate

Physically-based equation for infiltration rate assuming a sharp wetting front.

f(t)=K(1+ψ⋅ΔθF(t))f(t) = K \left( 1 + \frac{\psi \cdot \Delta \theta}{F(t)} \right)

Variables

SymbolDescriptionUnit
f(t)f(t)Infiltration rate at time t
KKSaturated hydraulic conductivity
ψ\psiSuction head at the wetting front
Δθ\Delta \thetaChange in volumetric moisture content
F(t)F(t)Cumulative infiltration volume
Key Takeaways
  • Hydrologic Losses (or abstractions) represent the portion of precipitation that does not contribute to direct surface runoff.
  • Primary losses include evaporation, transpiration, infiltration, interception, and depression storage.
  • Initial Abstractions (Interception and Depression Storage) must be satisfied before any significant surface runoff begins.
  • Evaporation is driven primarily by solar radiation and the vapor pressure deficit between the evaporating surface and the atmosphere.
  • Evapotranspiration (ET) combines soil evaporation and plant transpiration.
  • Potential ET (PET) assumes unlimited water, while Actual ET (AET) is constrained by real soil moisture. They are equal only when the soil is wet.
  • The FAO Penman-Monteith method is the standard physical model for estimating reference evapotranspiration, combining radiation-driven energy balance with wind-driven aerodynamic mass transfer.
  • Evaporation can be measured directly using a Class A Evaporation Pan (Cp≈0.7C_p \approx 0.7), while ET is physically measured using a Lysimeter.
  • Evaporation from reservoirs can be reduced using Chemical Films like Cetyl Alcohol.
  • Infiltration is the process of water entering the soil surface, heavily dependent on soil type, moisture content, and land cover.
  • Horton's Equation is an empirical model for the exponential decay of infiltration capacity during a storm event.
  • Physically-based alternatives include the Green-Ampt method (sharp wetting front) and Philip's Equation (sorptivity vs. gravity).
  • The Φ\Phi-Index is a constant loss rate assumption used to separate rainfall into hydrologic abstractions and direct runoff.
  • The W-Index represents the average infiltration rate excluding depression storage and interception.