Applications of Integration

Learning Objectives

  • Compute geometric area when bounding curves exchange order.
  • Calculate volumes by slicing, disks, washers, shells, and Pappus' centroid theorem.
  • Determine arc length and surface area using distance-based radii.
  • Compute centroids, first moments, and second moments of area for planar regions.
  • Distinguish geometric second moment of area from mass moment of inertia.
  • Model variable-force work, pumping work, hydrostatic force, and center of pressure.
  • Apply definite integrals to economic surplus and continuous probability.

Applications of integration share one principle: model a quantity on a small element, then sum those elements by integration. Correct setup depends on geometry, units, sign, and the physical meaning of the differential element.

Area Between Curves

Geometric Area

For continuous curves y=f(x)y=f(x) and y=g(x)y=g(x),

A=∫ab∣f(x)−g(x)∣ dx.A=\int_a^b |f(x)-g(x)|\,dx.

If one curve is known to stay above the other on the whole interval, the absolute value may be replaced by “top minus bottom.” If the curves cross, split the integral at their intersection points or retain the absolute value.

Area Exploration

Place a bound at an intersection and compare the separate regions. Reverse the bounds to see how the signed integral changes while the geometric area stays the same.

Area Between Curves

Concept and model scope

Split a region at exact intersection points and compare geometric area with the oriented integral of f minus g.

Each piece is integrated using the antiderivative of f minus g. Taking the magnitude on each piece gives the nonnegative geometric area. An intersection may be a tangency with the same curve above on both sides.

Try an endpoint exactly at an intersection, then reverse the bounds and compare the two results.

Controls

Select curves that cross, stay separated over the displayed domain, or touch tangentially.

-1.0

Starting bound of the signed integral. The geometric area is independent of the order.

2.0

Ending bound. Equal bounds enclose no area.

yx-303

Blue is f and amber is g. The shaded pieces show which curve is above.

Geometric area
1.833333
Signed integral from a to b
-1.500000
Intersections in interval
0, 1
Area by subinterval
IntervalUpper curveArea
-1 to 0g0.833333
0 to 1f0.166667
1 to 2g0.833333

Integrating with Respect to y

When horizontal slices are simpler, use “right minus left”:

A=∫cd∣xright(y)−xleft(y)∣ dy.A=\int_c^d |x_{\rm right}(y)-x_{\rm left}(y)|\,dy.

The bounds must be yy-values.

Polar Area and Arc Length

Polar Area

Area swept by a polar radius.

A=12∫αβr(θ)2 dθ.A=\frac12\int_\alpha^\beta r(\theta)^2\,d\theta.

Polar Arc Length

Length of a polar curve.

L=∫αβr2+(drdθ)2 dθ.L=\int_\alpha^\beta\sqrt{r^2+\left(\frac{dr}{d\theta}\right)^2}\,d\theta.

Volumes by Slicing

General Cross-Section Formula

If the area of the cross section perpendicular to the integration axis is A(x)A(x),

V=∫abA(x) dx.V=\int_a^b A(x)\,dx.

Slice Exploration

Choose a disk or washer and inspect one midpoint rectangle alongside its cross-section. Refine the partition and compare the volume estimate with the exact value.

Volume by slicing

Concept and model scope

Choose a disk or washer, inspect a midpoint cross-section, and compare the summed slice volumes with the exact integral.

At each midpoint, the outer radius is x and the inner radius is zero for a disk or x² for a washer. The plotted rectangles have area A(xi) ΔxA(x_i)\,\Delta x, so each represents one contribution to the volume sum.

Compare the selected slice in the profile and cross-section. Refine the partition and watch the estimate approach the exact volume.

Controls

Type of section perpendicular to the x-axis. Both cases have outer radius x.

1.00

Right end of the solid. The interval starts at zero.

8

Number of equal-width midpoint rectangles in the area profile.

1

Choose a midpoint rectangle and view the corresponding disk or washer.

A(x)π01xSlice 1 at x = 0.063
Midpoint volume
1.043107
Exact volume
1.047198
Selected slice volume
0.001534
Area 0.0123, width 0.1250.
Absolute relative error
0.391%

Disk and Washer Methods

Disk Method

Solid cross sections perpendicular to the axis.

V=π∫abR(x)2 dx.V=\pi\int_a^b R(x)^2\,dx.

Washer Method

Annular cross sections perpendicular to the axis.

V=π∫ab[R(x)2−r(x)2]dx,V=\pi\int_a^b\left[R(x)^2-r(x)^2\right]dx,
R(x)≥r(x)≥0R(x)\ge r(x)\ge0

Solid of Revolution: Model and Formula Must Match

y=x, 0≤x≤3,V=π∫03(x)2dx=9π2y=\sqrt{x},\ 0\le x\le3,\qquad V=\pi\int_0^3(\sqrt{x})^2dx=\frac{9\pi}{2}

The visual uses the exact functions and interval shown in the displayed integral. No hidden rescaling is applied to the mathematical model.

Cylindrical Shells

Shell Method

Thin shells parallel to the axis of revolution.

V=2π∫abρ(x)h(x) dx,V=2\pi\int_a^b \rho(x)h(x)\,dx,
ρ(x)\rho(x)
h(x)h(x)

Radius Means Distance

For rotation about a vertical line x=cx=c, the shell radius is ρ(x)=∣x−c∣\rho(x)=|x-c|, not the signed coordinate x−cx-c. For rotation about a horizontal line y=cy=c, use the corresponding vertical distance.

Arc Length

Cartesian Arc Length

Length of y=f(x).

L=∫ab1+[f′(x)]2 dx.L=\int_a^b\sqrt{1+[f'(x)]^2}\,dx.

Arc Length: Polygonal Approximation

L=∫011+4x2 dx=52+14asinh⁡(2)L=\int_0^1\sqrt{1+4x^2}\,dx=\frac{\sqrt5}{2}+\frac14\operatorname{asinh}(2)
Polygonal approximation
1.47777799
Analytical arc length
1.47894286
Absolute error
1.165e-3

This finite chord sum is an approximation in model coordinates, not an exact length and not a Riemann sum. Its limit motivates the arc-length integral.

Surface Area of Revolution

General Surface Formula

If a smooth curve is revolved about an axis that does not pass through the generating arc, the lateral surface area is

S=2π∫r ds,S=2\pi\int r\,ds,

where rr is the nonnegative perpendicular distance from the curve element to the axis.

About a Horizontal Axis y=c

Curve y=f(x).

S=2π∫ab∣f(x)−c∣1+[f′(x)]2 dx.S=2\pi\int_a^b |f(x)-c|\sqrt{1+[f'(x)]^2}\,dx.

About a Vertical Axis x=c

Curve y=f(x).

S=2π∫ab∣x−c∣1+[f′(x)]2 dx.S=2\pi\int_a^b |x-c|\sqrt{1+[f'(x)]^2}\,dx.

Do Not Use a Signed Radius

A radius is a distance. If f(x)−cf(x)-c or x−cx-c changes sign, split the interval or retain the absolute value. A signed radius can produce cancellation and a nonphysical negative surface contribution.

Centroids and First Moments of Area

For a uniform planar region, the centroid is a geometric property. Density is not required. If a nonuniform density is introduced, the corresponding center of mass becomes a mass property.

Region Between Two Curves

For f(x)≥g(x)f(x)\ge g(x) on [a,b][a,b],

A=∫ab[f−g]dx,A=\int_a^b[f-g]dx,My=∫abx[f−g]dx,Mx=12∫ab[f2−g2]dx,M_y=\int_a^b x[f-g]dx, \qquad M_x=\frac12\int_a^b[f^2-g^2]dx,xˉ=MyA,yˉ=MxA.\bar x=\frac{M_y}{A},\qquad \bar y=\frac{M_x}{A}.

Second Moment of Area

Second Moment of Area

For a planar area AA,

Ix=∫Ay2 dA,Iy=∫Ax2 dA.I_x=\int_A y^2\,dA,\qquad I_y=\int_A x^2\,dA.

These are geometric section properties with units of length to the fourth power, such as mm4\mathrm{mm}^4 or m4\mathrm{m}^4. In structural mechanics they appear in bending stiffness EIEI, bending stress relations, and deflection calculations.

Between y=f(x) and y=g(x)

For f(x)≥g(x)f(x)\ge g(x),

Ix=13∫ab[f(x)3−g(x)3]dx,I_x=\frac13\int_a^b\left[f(x)^3-g(x)^3\right]dx,Iy=∫abx2[f(x)−g(x)]dx.I_y=\int_a^b x^2[f(x)-g(x)]dx.

Do Not Confuse Area and Mass Moments

The mass moment of inertia is

Im=∫r2 dm,I_m=\int r^2\,dm,

with units of mass times length squared, and it enters rotational dynamics through ∑M=Imα\sum M=I_m\alpha. The second moment of area uses dAdA, has units L4L^4, and does not by itself describe resistance to angular acceleration.

Work by a Variable Force

Variable-Force Work

One-dimensional work along x.

W=∫abF(x) dx.W=\int_a^b F(x)\,dx.

Hooke's Law

For an ideal spring, F=kxF=kx, so stretching from x=ax=a to x=bx=b requires

W=∫abkx dx=k2(b2−a2).W=\int_a^b kx\,dx=\frac{k}{2}(b^2-a^2).

Using one constant endpoint force generally gives the wrong work because the spring force varies with extension.

Pumping Fluids

For a thin fluid slice, model

dW=(weight density)(slice volume)(lifting distance).dW=(\text{weight density})(\text{slice volume})(\text{lifting distance}).

If mass density is ρ\rho, weight density is ρg\rho g.

Hydrostatic Force and Center of Pressure

Hydrostatic Pressure

Gauge pressure at depth h below a free surface.

p=ρgh.p=\rho gh.

Hydrostatic Force

Force on a plane surface by integration.

F=∫Ap dA=ρg∫Ah dA.F=\int_A p\,dA=\rho g\int_A h\,dA.

Center of Pressure

For a vertical plane surface, the depth of the resultant force satisfies

hcp=∫Ah2 dA∫Ah dA.h_{cp}=\frac{\int_A h^2\,dA}{\int_A h\,dA}.

For a vertical rectangle whose top edge is at the free surface and height is HH, hcp=2H/3h_{cp}=2H/3, deeper than the centroid depth H/2H/2 because pressure increases with depth.

Theorems of Pappus–Guldinus

The centroid theorems apply when the generating curve or planar region is revolved through a full turn about an external coplanar axis that does not intersect the generating curve/region (apart from standard limiting boundary cases handled separately).

Pappus Formulas

Surface generated by a plane curve of length LL:

S=(2πrˉ)L.S=(2\pi\bar r)L.

Volume generated by a plane area AA:

V=(2πrˉ)A.V=(2\pi\bar r)A.

Here rˉ\bar r is the perpendicular distance from the generating curve/area centroid to the axis.

Pappus Volume Theorem: External-Axis Condition

Validity: Valid external axis: d > r

d=3.0,r=1.5,d>rd=3.0,\quad r=1.5,\quad d>r
V=(2πd)(πr2)=2π2dr2V=(2\pi d)(\pi r^2)=2\pi^2dr^2

Volume: 133.2397 cubic units

Both controls enforce the theorem condition. Increasing r automatically moves d outward if necessary, so the displayed Pappus result never describes an axis cutting through the generating disk.

Economic Surplus

Consumer and Producer Surplus

If market quantity is Q∗Q^* and equilibrium price is P∗P^*,

CS=∫0Q∗[D(q)−P∗]dq,CS=\int_0^{Q^*}[D(q)-P^*]dq,PS=∫0Q∗[P∗−S(q)]dq,PS=\int_0^{Q^*}[P^*-S(q)]dq,

provided demand lies above the market price and supply lies below it over the traded interval.

Continuous Probability

Probability Density Function

A continuous PDF satisfies f(x)≥0f(x)\ge0 and

∫−∞∞f(x) dx=1.\int_{-\infty}^{\infty}f(x)\,dx=1.

Then

P(a≤X≤b)=∫abf(x) dx.P(a\le X\le b)=\int_a^b f(x)\,dx.

A density value itself is not a point probability; for a continuous random variable, P(X=x)=0P(X=x)=0.

Dimensional Check

Area has units L2L^2, volume L3L^3, arc length LL, surface area L2L^2, second moment of area L4L^4, mass moment of inertia ML2ML^2, force ML/T2ML/T^2, and work ML2/T2ML^2/T^2. Unit consistency is a powerful setup check.